Resources
BMH05104-2 Module Resources
Quick Start
Product: BMH05104-2 — 4-Electrode Body Composition Module Version date: 2026-05-22
BMH05104-2 is BestHealth Electronics' 4-electrode body composition measurement module, integrating bioimpedance (BIA), weight, and heart-rate measurements. The module interfaces with a host MCU or PC over UART using a command protocol, and serves as the core measurement subsystem inside body-fat scales and health-measurement terminals. The module is command- and pin-compatible with its predecessor BMH05102, enabling smooth upgrades for existing customer products.
BMH05104-2/
├── 1.doc/ # Documents and reference materials
└── 2.board/ # Module outline / footprintCustomer-facing reference material shipped with the module.
| File | Description |
|---|---|
BMH05104-2(四电级体成分模块)_datasheet.pdf | Required reading — module datasheet: pinout, electrical parameters, UART commands, typical application |
BMH05104-2.exe | Companion PC host tool (command testing, module bring-up) |
Recommended reading order: review the "Pinout" and "Electrical Characteristics" sections of the datasheet before hardware design. Compatibility notes for customers migrating from BMH05102 are included in the datasheet's compatibility chapter.
Mechanical reference so customers can reserve the correct footprint and outline on their carrier board.
| File | Description |
|---|---|
DXF_BMH05104-2_AutoCAD2007.dxf | Module outline DXF (AutoCAD 2007 format) for footprint and outline alignment on the customer's mainboard |
- Read the datasheet —
1.doc/BMH05104-2(四电级体成分模块)_datasheet.pdf - Reserve outline / footprint — see
2.board/DXF_BMH05104-2_AutoCAD2007.dxf - UART wiring — wire per the datasheet "Pinout" section (default UART 8N1)
- Command bring-up — use
1.doc/BMH05104-2.exeto send test commands
- Resource pack version: based on the BMH05104-2 module design as of 2026-05-22.
- Technical support: tony@e-besthealth.com (project contact)
- Business inquiries: info@e-besthealth.com
- Website: https://www.e-besthealth.com
- Address: Office 301, Building 10, Xinzhu Garden, No.4 Xinzhu Road, Songshan Lake, Dongguan, Guangdong, China
- Phone: +86-769-26261311
The materials in this repository — including hardware schematics, PCB files, source code, and documents — are provided solely for customer reference and evaluation. Before using these materials in product design, mass production, or commercial deployment, customers are responsible for conducting full functional testing, reliability validation, and regulatory certification. BestHealth Electronics Inc. (悠健电子（东莞）有限公司) shall not be liable for any direct or indirect losses arising from the customer's use of these materials in production, sale, or operation — including but not limited to yield issues, field failures, product recalls, or end-customer claims. These materials are provided "as is" without warranty of any kind, express or implied.
All materials in this repository (including but not limited to hardware design files, source code, documents, trademarks, and logos) are the intellectual property of BestHealth Electronics Inc. (悠健电子（东莞）有限公司), protected by applicable laws. Customers are granted only the right to use these materials for reference and evaluation. Reverse engineering, resale, redistribution, or unauthorized public release is prohibited without prior written consent.
© 2026 BestHealth Electronics Inc. (悠健电子（东莞）有限公司) All Rights Reserved.
This README is a directory-level guide for customer-facing handoff. Refer to the datasheet for exact command and register specifications.
